Description
K36 | 36-Piece Punch & Chisel Set in plastic molded case.
Order #K36
MFG# K36.NP/DR
K 36 Includes 1 of Each
MFG # | DESCRIPTION |
CC 832 | 1/4″ x 4-3/4″ COLD CHISEL |
CC1232 | 3/8″ x 5-1/4″ COLD CHISEL |
CC1632 | 1/2″ x 6″ COLD CHISEL |
CC2432 | 3/4″ x 7″ COLD CHISEL |
CCL2432 | 3/4″x 12″ LONG COLD CHISEL |
CD 632 | 3/16″ x 5″ DIAMOND POINT CHISEL |
CP 832 | 1/4″ x 5-1/2″ CAPE CHISEL |
CR 832 | 1/4″ x 5-1/2″ ROUND NOSE CHISEL |
PC 832 | 1/4″ x 4-1/4″ CENTER PUNCH |
PC1632 | 1/2″ x 6″ CENTER PUNCH |
PLT 632 | 3/16″ x 9″ LONG TAPER PUNCH |
PLT 832 | 1/4″ x 11″ LONG TAPER PUNCH |
PLT1032 | 5/16″ x 11″ LONG TAPER PUNCH |
PP 232 | 1/16″ x 4-1/4″ PIN PUNCH |
PP 332 | 3/32″ x 4-3/4″ PIN PUNCH |
PP 432 | 1/8″ x 5″ PIN PUNCH |
PP 532 | 5/32″ x 5-1/4″ PIN PUNCH |
PP 564 | 5/64″ x 4-1/2″ PIN PUNCH |
PP 632 | 3/16″ x 5-1/2″ PIN PUNCH |
PP 832 | 1/4″ x 7″ PIN PUNCH |
PP1232 | 3/8″ x 7″ PIN PUNCH |
PPL 632 | 3/16″ x 9″ LONG PIN PUNCH |
PPL1032 | 5/16″ x 9″ LONG PIN PUNCH |
PR 832 | 1/4″ x 4-1/4″ PRICK PUNCH |
PS 232 | 1/16″ x 4-1/2″ SOLID PUNCH |
PS 432 | 1/8″ x 4-1/2″ SOLID PUNCH |
PS 832 | 1/4″ x 6″ SOLID PUNCH |
PS1032 | 5/16″ x 7″ SOLID PUNCH |
RS 232 | 1/16″ x 4-1/2″ ROLL SPRING PUNCH |
RS 332 | 3/32″ x 5″ ROLL SPRING PUNCH |
RS 432 | 1/8″ x 5-1/2″ ROLL SPRING PUNCH |
RS 532 | 5/32″ x 6-1/4″ ROLL SPRING PUNCH |
RS 564 | 5/64″ x 4-3/4″ ROLL SPRING PUNCH |
RS 832 | 1/4″ x 7-1/4″ ROLL SPRING PUNCH |
RS1232 | 3/8″ x 8″ ROLL SPRING PUNCH |
RS1632 | 1/2″ x 9-1/4″ ROLL SPRING PUNCH |
All Wilde punches and chisels are forged from high-carbon molybdenum tool steel and individually heat-treated to make them the toughest striking tools on the market. Wilde punches and chisels are hardened the entire length with a tempered striking end.
Chisel cutting edges are sharpened and re-sharpened to give the keenest points available. Pin Punches have a reverse taper point which eliminates the punch from sticking in the work-place.
Chisels are designed to be re-sharpened once they become dull. Care should be taken that excessive heat is not obtained when re-sharpening. If the grinding temperature is not controlled, the hardness can be taken out of the immediate area. More importantly, a hard, brittle surface can be set which is very susceptible to fracture.
Always wear safety goggles when using punches and chisels.
When looking for quality punches and chisels, professionals look for Wilde.
Additional information
Weight | 9.6 lbs |
---|---|
Set Consists Of | •1/4, 3/8, 1/2, 3/4 inch Cold Chisels |